Arcalian Ltd
Dust Control - PCB
| Are you suffering from "tents" under your dry-film resist due to brush particles? |
| Is dust on your exposure frames contributing to poor image transfer at primary or secondary image? |
| Are you getting too many false readings at AOI? |
| Are you having bonding problems? |
| Are customers rejecting good boards because of cosmetic problems after soldermask? |
| Do you know in which areas you should be concerned with contamination? Click HERE if you don't! |
We have the answer.
Arcalian offers solutions for:
| Manual or low volume processes |
| Offline or medium volume processes |
| Inline or high volume processes |
Manual/Low Volume
Use the SDI Dust Removal System as shown. The hand roller is smoothly applied to any flat surface, removing any loose, dry contamination. The roller is then cleaned on the Adhesive Pad which traps the contamination, leaving the roller clean for the next surface.
Use High Tack rollers for rigid substrates such as laminate, or boards at soldermask.
Use Medium and Low Tack for phototools and inner layers, or our special Thin Film polymer for polyimide or dry-film laminated panels prior to exposure
Use a Silicone-Free roller and pad, where coating or laminating, to ensure adhesion.
Click HERE to see where to use the Dust Removal System.
Offline or Medium Volume
A development of the Dust Removal System is the MicroKlean X3 series of sheet cleaners. These machines can process and clean any PCB material either in-line (uni-directionally) or off-line at the operator's side (auto-reverse) mode. Both sides are cleaned at once, and anti-static bars ensure no re-attraction of airborne contaminants. Versions suitable for dry-film laminated panels are available, and Silicone-Free polymer and adhesive rolls can be used in sensitive areas.
Click HERE to see where to use the MicroKlean X3.
Inline
or High Volume
The MicroKlean IL series represents the highest end volume PCB production.
Companies running three-shift operation will benefit from the robust construction and side pull-out of both the Adhesive Rolls and Polymer Roller cartridge (Patent No US 6,200,392 B1).
The footprint of the IL series is minimal (less than 200mm), meaning it can be easily slotted into existing production lines.
The IL series can clean and process dry-film laminated panels and can be supplied with Silicone-Free polymer and adhesive rolls.
Click HERE to see where to use the MicroKlean IL.
How do I contact you directly? Click here! HOME